Connecting NETCOMM NF18 Mesh to NBN Network
To improve your browsing experience, we recommend you update your NetComm modem setting by following the steps below;
Connection Profile Update Steps
STEP 1: Connect to your modem configuration page by visiting 192.168.20.1
- Enter the username and password that's either located at the bottom of the modem or if you modified it use the new one. Example default Username – admin & Password - admin
STEP 2: Once logged in you will the see the summary page of your modem settings:
STEP 3: Access the Internet Option by clicking 
STEP 4: Configure you modem based on your Connection type:
Fibre To The Node & Building (FTTN/B): If you have a current connection setup, Click VDSL from the Internet Service Information page. To Create New skip to STEP 5
For FTTP, FTTC, HFC & FW skip to STEP 7
When you click the VDSL connection it will expand to make Edit's
Click More Options to expand further details. If you are Editing an existing connection skip to STEP 6
STEP 5: Configure you modem to create new connection:
If you don't see the option click Create New
STEP 6: On the right side of the page click the following options:
- Ensure VDSL is selected for FTTN/B connection type
- Choose PPPoE and enter your flip provided username and password. If you don't have this info please choose Dynamic IP options
- On the IP Protocol type select IPv4/IPv8
Click Apply and wait 2 minutes for configurations to take affect.
STEP 7: Fibre To The Premise, Fixed Wireless, Fibre to the Curb and HFC:
Click ETH WAN from the Internet Service Information page or create new and select;
- Internet Service - Ethernet WAN
- Choose PPPoE and enter your flip provided username and password. If you don't have this info please choose Dynamic IP options
- On the IP Protocol type select IPv4/IPv8
